某贫磁赤铁矿石选矿工艺试验研究

为了使某矿山贫磁赤铁矿资源得到合理的开发利用，针对现开采部位矿石的性质和可选性问题，进行了工艺矿物学和可选性试验研究。试验结果表明：采用弱磁、强磁—阴离子反浮选工艺可得到精矿铁品位68.55%、精矿产率36.41%、金属回收率79.92%、尾矿品位9.86%的较好选别指标，说明矿石的可选性较好，为该矿石的合理开发利用提供了可靠的技术依据。     

Tributyl phosphate additive enhancing catalytic absorption of NO2 for simultaneous removal of SO2/NOx in wet desulfurization system

Removal of SO₂ and NO emissions from coal-fired power plants have always been the focus in coal's utilization industries for which traditional wet desulfurization system hold the potential to achieve simultaneous removal of SO₂/NO_x. In this work, a novel liquid catalyst (tributyl phosphate, TBP) was investigated for the simultaneous removal of SO₂ and NO_x in a NO pre-oxidation (ozone oxidation) assisted process. The absorption process and reaction mechanism of SO₂ and NO₂ were studied in a small-scale experimental system, and the removal efficiency of pollutant and the key parameters were examined in a pilot-scale system. The results show that the removal efficiency of NO₂ in traditional wet desulfurization system is only 20–40%; however greatly increases to >90% when TBP is added. Moreover, TBP can enhance the NO₂ removal performance in the presence of SO₂ due to the formation of TBP–NO₂–SO₃²⁻ complex. Considering the oily nature of TBP that can be easily separated, such addition strategy hold great potential for industrial SO₂/NO_x simultaneously removal.     

王坡煤矿煤层顶板稳定性主控因素分析

煤炭开采过程中极易发生顶板事故。基于王坡煤矿的地质条件，利用钻孔、井下钻探、物探、生产揭露资料，分别对该矿煤层顶板沉积特征、煤层顶板岩石结构特征进行系统分析研究，通过实验室室内测试，获取了煤层顶板岩石抗压强度、泊松比、坚固性系数、黏聚力等物理力学性质指标，最终确定了影响煤层顶板稳定性相关因素；运用层次分析法确定影响因素的权重值，得出岩石力学性质是影响煤层顶板稳定性的主控因素。研究可为类似煤矿顶板稳定性因素分析提供借鉴。     

Chemical process fault diagnosis based on enchanted machine‐learning approach

In the chemical industry, fault diagnosis is a challenging task due to the complexity of chemical equipment. This paper proposes a machine learning‐based approach to achieve the goal of fault diagnosis. First, in order to reduce the impact of redundant features, support vector machine recursive feature elimination (SVMRFE) is used to select important features. The trained probabilistic neural network (PNN) is then used for fault diagnosis. Considering that the diagnostic performance is affected by its hidden layer element smoothing factor (σ), the modified bat algorithm (MBA) is used to optimize the PNN to obtain optimal global parameter values. The MBA adopts a better optimization mechanism than the basic algorithm and achieves excellent global convergence. It can globally optimize the smoothing factor, which effectively improves the fault diagnosis ability of the PNN. During the testing of the Tennessee Eastman (TE) process data set, we evaluate the performance of the proposed model by comparing the F₁‐score and accuracy of the different methods. The charts provided describe the fault diagnostic results and classification for the different models. The results indicate that the MBA has a better optimization ability than other traditional optimization algorithms. At the same time, the combination method proposed in this paper is also superior to others and can significantly improve the accuracy of TE process fault diagnosis.     

高伸长率冷轧双相钢DP980显微组织及性能

摘要：为了进一步提高冷轧双相钢DP980的强塑性，采用低C-Si-Mn-Nb-Cr成分，通过调整连续退火工艺参数，系统研究了工艺组织性能的关系，利用OM、SEM、EBSD分析了不同退火温度条件下各相的比例、尺寸、形貌、分布，同时利用力学拉伸试验手段研究了连退两相区退火温度对强塑性的影响。结果表明，通过优化调整连续退火工艺，不仅可以在冷轧铁素体和马氏体双相钢的组织上获得少量的残余奥氏体，也能细化再结晶晶粒，最终获得ReL/Rm≤0.5、高伸长率A50≥15%的冷轧DP980，提高强塑性的同时改善了成型性能。     

Refinement of primary carbides in AISI DC 53 cold work tool steel by thin section copper permanent mould casting and water atomization

In this study, as alternative methods to conventional production methods involving thin section copper permanent mould casting (fast solidification) and water atomization (rapid solidification) of AISI DC 53 cold work tool steel have been investigated. Thin slabs obtained by copper mould casting was homogenized at 1150 °C for one hour and then hot rolling was be applied. After hot rolling, conventional heat treatment have been applied to thin slabs. The same heat treatment procedure have been performed for a commercially available AISI DC 53 which is manufactured by thick section ingot casting and rolling. In order to investigate also the effect of rapid solidification on AISI DC 53 tool steel, steel powder was produced by water atomization technique. Experiments have revealed that thin steel slabs in permanent copper mould and rapidly solidified tool steel powder by water atomization have a more refined primary M₇C₃ carbides than commercially available steel.     

电阻层析成像技术及其在水合物开采模拟实验中的应用

电阻层析成像是一种可视化的无损测量手段,可以为天然气水合物开采过程室内模拟实验提供有效的监测途径。首先介绍了电阻层析成像技术的工作原理、发展历程与应用现状,重点对电阻层析成像技术在天然气水合物室内模拟实验方面的主要应用进行了综述,并分析了存在的问题,在此基础上给出了解决问题的建议,为下一步开展水合物的电阻层析成像实验提供参考。     

超高强韧油井管合金设计与高强韧机制

 为了揭示1 000 MPa级低碳加铌钒钛微合金钢的高强韧机制,研究了S1(w(C)=0.09%)与S2(w(C)=0.17%)两种合金成分的油井管钢成分-工艺-组织-性能关系。试验表明,两种成分试验钢经水淬后的组织分别为板条贝氏体加少量马氏体和马氏体加少量贝氏体的复相组织。两种成分钢经过450~600 ℃、30 min的中温回火后,组织中均出现碳化物析出,且S1试验钢回火后的屈服强度基本不变,抗拉强度下降了约70 MPa,S2试验钢回火后的屈服强度与抗拉强度迅速升高170 MPa左右。溶度积公式的计算结果表明,两种钢的水淬组织中铌、钛元素析出彻底且析出物的体积分数都很小,因此回火铁素体基体中的VC析出强化对S1试验钢回火后屈服强度保持不变以及S2试验钢回火后屈服、抗拉强度提高起到重要作用。     

耐蚀合金中TiN析出机制

摘要：TiN颗粒尺寸及其分布对耐蚀合金性能有明显的影响，因此有必要对TiN在铸坯中的分布及其析出行为进行研究。采用扫描电镜(SEM)、金相显微镜（OM）观察了TiN夹杂物在铸坯中的分布、尺寸及其形貌；基于热力学和动力学理论分析了耐蚀合金铸坯中TiN夹杂物的析出时机及其尺寸，结合试验结果和理论计算明确了TiN夹杂物在凝固后铸坯中的位置和尺寸与析出时机的关系，为控制TiN夹杂物提供理论指导。结果表明，冶炼过程中析出的TiN夹杂物尺寸较大，在凝固过程中被枝晶吞没，位于铸坯枝晶内和等轴晶内；微观偏析计算结果表明，在凝固分数为0.55时，TiN开始析出，最开始析出TiN夹杂物的逐渐长大，长大后的TiN易于被二次枝晶吞没，最终位于铸坯中的枝晶间和等轴晶内，后期析出的TiN则在枝晶间和等轴晶间。固相中析出的TiN夹杂物长大较慢，尺寸细小，最终位于奥氏体晶界。     

基于UG的采煤机防爆盖板三维标注及数控工艺研究

随着三维CAD技术的发展,产品制造信息在三维模型和二维图纸之间的反复传递,严重影响了产品制造信息的正确、快速传递。基于三维产品制造信息技术,以采煤机防爆盖板为例,在UG NX10.0中建立了防爆盖板的三维模型并进行了三维标注,设计了加工工艺路线,规划了数控加工刀具轨迹,进行了加工仿真,验证了数控加工的正确性,在此基础上完成了采煤机防爆盖板的三维工艺式设计。该研究对基于模型定义的数字化设计与制造研究,实现制造业信息化具有重要意义。